20 YEARS OF MANUFACTURING INNOVATION INGENUITY RELIABILITY COLLABORATION RESPONSIBILTY
Solid Chemistry Discs, manufactured by AP Tech, will provide you with trusted chemistry in a safe and convenient form. Discs are easy to store and stock – never run out of product. Discs also allow for complete product use – place one disc on top of another (while in the dissolver) and repeat as needed. It’s as easy as 1, 2, 3 – simply pull a disc from the shelf, remove the plastic wrap, and place in the dissolver.
DISC FAQ's
The enduroTEQ line of dissolvers (Ultra-M, Ultra-G, Ultra-T) are compatible and recommended for use with AP Tech solid chemistry discs.
The enduroTEQ dissolvers can hold up to 4 discs. Remove the recyclable plastic covering from the disc, then place it inside the dissolver (one on top of the other.) “Top off” discs as needed.
One case consists of eight, 6″ discs. Each disc is individually wrapped in 100% recyclable plastic and weighs approximately 5 to 6 pounds each.
Like most AP Tech solid chemistry products, discs have a shelf life of 2 years. If stored properly (in a dry area that is under 100ºF) the shelf life may be extended as we have tested product that is 5 years old with no degradation of actives.
No special storage or containment is required for discs, but we do recommend storing them in dry areas that are under 100ºF to maximize shelf life. Discs are easy to store and can be stacked on a shelf or in a cabinet. They are small (6″ diameter) and lightweight (5 pound/disc.) Each disc is wrapped in 100% recyclable plastic.
Discs are manufactured by AP Tech in West Chester, Ohio, USA and shipped safely all over the world. Please contact us (by clicking here)if you’d like to be contacted by a trusted distributor of AP Tech solid prducts.
